• Westin Nerf Bars Installation Instructions
• Westin Step Bar Installation Instructions Ford
• Westin Nerf Bars Installation Instructions Chevy

Side steps make it much easier to get in and out of your Dodge Ram 1500. Ram owners have a choice of installing running boards, side steps or stirrup steps. The side steps are the most common and generally come in chrome, stainless steel or powder coated black. Installation is fairly easy because the trucks are already equipped with holes in the body where you can mount the steps. Stainless steel side steps shine like chrome and can add to the appearance of your truck. The instructions below are for a 2008 or newer Dodge Ram regular, quad or crew cab.

The Westin logo should face outward. Align and adjust step bars as needed and tighten all hardware at this time. Torque all M8 fasteners to 15-20 ft-lbs and M10 fas-teners to 20-25 ft-lbs (fig 10 & 11). Make sure to re-tighten the center rocket panel hex head cap screws that you loosened in step 3. Save on Westin Dodge Ram 4' Polished Stainless Steel Pro Traxx Oval Nerf Bars with Free Shipping. AutoTruckToys carries a full line of Westin Dodge Ram 4' Polished Stainless Steel Pro Traxx Oval Nerf Bars as well as car, truck, Jeep and SUV accessories. All available at discount prices. Shop online or call 800-544-6194.

Step 1

Gather and check all the materials to install the side steps. The installation set should come with the side steps, brackets, nuts, bolts, plastic covers and instructions.

Step 2

Start by lying down under your driver's side door and identifying the two pre-drilled holes behind the front tire. These are the pre-drilled holes in the truck body for installing side steps. The holes will be covered by a piece of tape and are about an inch wide.

Step 3

Remove the tape from the holes and place the stud and nut plate from your installation kit in the holes you just uncovered. Tighten the plastic retainer to the stud plate until it is secure. Do this for both holes at the front of the driver's side.

Step 4

Attach the driver's side mounting bracket to the stud plates you just installed using provided hardware from your installation kit. Do not torque this hardware down yet.

Step 5

Line up the second stud from the front of the vehicle with the rocker panel hole and mounting bracket slot. Insert the bolt, washer and lock washer but again, do not torque this down tight yet.

Westin Nerf Bars Installation Instructions

Step 6

Remove the body mount bolt and attach the mount support bracket between the body mount and the body mount bolt assembly. The body mount bolt is located right above your head if you are lying under your truck looking at the two stud plates that you installed earlier.

Step 7

Remove the tape from the last hole located at the rear of the driver's side passenger door, if you have a quad cab. If you have a regular cab, uncover the last whole at the rear of the driver's side door. Install the stud plate and tighten the retainer until it is secure.

• Download Active File Recovery 15.0.7 with Key Free from given links. Active File Recovery Professional 15.0.7 ScreenShots: Active File Recovery 15.0.7 Key: Active File Recovery 15.0.7 Registration key:- UC54-3C1ZPX-4WQ3V-93EP28-NHZYQC How to Crack Active File Recovery 15.0.7 Download? It can also help you to get better files lost due to accidental disk formatting by virus attack, malicious program, or a power failure. Active File Recovery 15.0.7 License Key will data restoring when partition or volume is deleted, damaged or formatted. Active file recovery key generator free.

Step 8

Attach the rear mounting bracket and again, line up the lower hole of the bracket with the stud plate and secure. Attach the side step bars to the brackets and secure with the bolts and washers from your kit. When you are satisfied that everything is lined up evenly, torque all bolts to the specifications on your instruction sheet.

Westin Step Bar Installation Instructions Ford

Repeat steps 2 through 8 for the passenger side installation.

Westin Nerf Bars Installation Instructions Chevy

Items you will need

• Socket and ratchet
• Wrenches
• Torque wrench
• Side step installation kit
• Drill (depending on what type of side steps you purchase)

More Articles